300 - ES

ES 6090

EL.10.06090

Application
The ES is designed to facilitate the use of the linear ball bearing. The obtainable stroke depends on the allowed deflection of the shafts with respect to their length, to their diameter and to the  considered load, as well as the relative position of the elements composing on it.
It can be used with mobile shafts (according to drawings), or with fixed ones. These elements
are manufactured for shafts with a diameter from 6 to 80 mm.
Design
The ball-bearing supports and shaft supports are made of grey cast iron, ground on all sides.
Precision
The distance between the shafts is constant within 5 μ m. The parallelism between the fixing bases and the shafts is guaranteed to 10 μ m, according to the quality of the chosen shafts and ball bearings.
 

Product Number EL.10.06090
Product Designation ES 6090
Outer diameter D 0
Inner diameter d 0
Dynamic factor Y 0.000000
Diameter pins PB G 8
Diameter Counterbore W 18
Diameter screw slot V 10.5
Diameter frontal hole PB t 8
Diameter frontal hole PR T 15
Diameter shaft hole d 60
Diameter bearing holes D 90
Difference height PB-PR Y 3
Center distance pin PB A 260
Center distance shaft holes C 180
Center distance screw PB B 90
Center distance srew-pins (width) PR N 70
Center distance srew-pins (length) PR M 90
Height F 113
Total height unit H 116
Height shaft holes K 58
Width L 290
Length bar holder PB 45
Length bearing holder PR 130
Material GG
Depth Counterbore U 12

300 - ES

Download

ES 6090

EL.10.06090

300 - ES

Application
The ES is designed to facilitate the use of the linear ball bearing. The obtainable stroke depends on the allowed deflection of the shafts with respect to their length, to their diameter and to the  considered load, as well as the relative position of the elements composing on it.
It can be used with mobile shafts (according to drawings), or with fixed ones. These elements
are manufactured for shafts with a diameter from 6 to 80 mm.
Design
The ball-bearing supports and shaft supports are made of grey cast iron, ground on all sides.
Precision
The distance between the shafts is constant within 5 μ m. The parallelism between the fixing bases and the shafts is guaranteed to 10 μ m, according to the quality of the chosen shafts and ball bearings.
 

Internal diameter

0 mm

Outside diameter

0 mm

300 - ES