SFERAX INCHES STANDARD 406080 XA
7010.406080.30
Application
This ball bearing provides high precision linear movements, without stroke limitation, without play and practically free of friction and wear.
Design
Consists of a rigid housing produced from bearing steel 100 Cr6, hardened to 63 HRC, ground and lapped inside, (Grade B only ground). Solid brass precision-milled ball tray.
Inner diameter d
63.5 mm
Outer diameter D
95.25 mm
Length
127 mm
Lead time to be confirmed
| Product Number | 7010.406080.30 |
| Product Designation | SFERAX INCHES STANDARD 406080 XA |
| Net Weight | 3050 g |
| Outer diameter D | 95.25 |
| Inner diameter d | 63.5 |
| Length | 127 mm |
| Tolerance Inner diameter | 0/-10 µm |
| Tolerance outer diameter | 0/-14 µm |
| Tolerance length | 0/-350 µm |
| Max. eccentricity | <12 µm |
| Recommended tolerance on the shaft | -3/-9 µm |
| Dynamic load capacity | 20223 |
| Static load capacity N | 22470 |
| Dynamic factor Y | 0.000044 |
| Diameter balls b | 7.000 mm |
| Diameter bottom of grooves D1 | 92.0 mm |
| Spacing grooves (0/+01 mm) E | 95.250 mm |
| Width groove 0/+0.1 mm e | 2.90 mm |
| Cage material | DIN MS60Pb (17660) |
| Housing material | DIN 100Cr6 (1.3505) |
| Operating temperature | -30 / +80°C |
| Precision class | XA |
| Recommended shaft quality | I, IIIR |
| Tolerance Bore (pressed mounted) | -2/-8 µm |
| Tolerance bore (glue mounted) | H6 |
