SFERAX INCHES STANDARD 243848 ZA
7010.243848.40
Application
This ball bearing provides high precision linear movements, without stroke limitation, without play and practically free of friction and wear.
Design
Consists of a rigid housing produced from bearing steel 100 Cr6, hardened to 63 HRC, ground and lapped inside, (Grade B only ground). Solid brass precision-milled ball tray.
Inner diameter d
38.1 mm
Outer diameter D
60.325 mm
Length
76 mm
Lead time to be confirmed
| Product Number | 7010.243848.40 |
| Product Designation | SFERAX INCHES STANDARD 243848 ZA |
| Net Weight | 931 g |
| Outer diameter D | 60.325 |
| Inner diameter d | 38.1 |
| Length | 76 mm |
| Tolerance Inner diameter | 0/-4 µm |
| Tolerance outer diameter | 0/-8 µm |
| Tolerance length | 0/-300 µm |
| Max. eccentricity | <5 µm |
| Recommended tolerance on the shaft | 0/-5 µm |
| Dynamic load capacity | 6507 |
| Static load capacity N | 7230 |
| Dynamic factor Y | 0.000138 |
| Diameter balls b | 5.000 mm |
| Diameter bottom of grooves D1 | 58.3 mm |
| Spacing grooves (0/+01 mm) E | 57.150 mm |
| Width groove 0/+0.1 mm e | 2.10 mm |
| Cage material | DIN MS60Pb (17660) |
| Housing material | DIN 100Cr6 (1.3505) |
| Operating temperature | -30 / +80°C |
| Precision class | ZA |
| Recommended shaft quality | I, IIIR |
| Tolerance Bore (pressed mounted) | 0/-4 µm |
| Tolerance bore (glue mounted) | H6 |
