ES1 1017
EL.20.01017
Application
The standard ball-bearing table type ES-1 allows almost the same applications as the type ES.
Features
- The 4 ball bearings are assembled on a single support.
- The longitudinal distance between the SFERAX is not adjustable.
- Assembly is easier.
- Slightly higher precision.
| Product Number | EL.20.01017 |
| Product Designation | ES1 1017 |
| Outer diameter D | 0 |
| Inner diameter d | 0 |
| Dynamic factor Y | 0.000000 |
| Diameter pins PB G | 5 |
| Diameter Counterbore W | 10 |
| Diameter screw slot V | 5.5 |
| Diameter frontal hole PB t | 5 |
| Diameter frontal hole PR T | 8 |
| Diameter shaft hole d | 10 |
| Diameter bearing holes D | 17 |
| Difference height PB-PR Y | 2 |
| Center distance pin PB A | 68 |
| Center distance shaft holes C | 50 |
| Center distance screw PB B | 30 |
| Height F | 30 |
| Total height unit H | 32 |
| Height shaft holes K | 32 |
| Width L | 80 |
| Length bar holder PB | 14 |
| Material | GG |
| Depth Counterbore U | 5.5 |
