301 - ES-1

ES1 2540

EL.20.02540

Application
The standard ball-bearing table type ES-1 allows almost the same applications as the type ES.
Features
- The 4 ball bearings are assembled on a single support. 
- The longitudinal distance between the SFERAX is not adjustable.
- Assembly is easier.
- Slightly higher precision.

Product Number EL.20.02540
Product Designation ES1 2540
Outer diameter D 0
Inner diameter d 0
Dynamic factor Y 0.000000
Diameter pins PB G 6
Diameter Counterbore W 11
Diameter screw slot V 6.5
Diameter frontal hole PB t 5
Diameter frontal hole PR T 10
Diameter shaft hole d 25
Diameter bearing holes D 40
Difference height PB-PR Y 2
Center distance pin PB A 114
Center distance shaft holes C 80
Center distance screw PB B 42
Height F 54
Total height unit H 56
Height shaft holes K 56
Width L 132
Length bar holder PB 22
Material GG
Depth Counterbore U 6.5

301 - ES-1

Download

ES1 2540

EL.20.02540

301 - ES-1

Application
The standard ball-bearing table type ES-1 allows almost the same applications as the type ES.
Features
- The 4 ball bearings are assembled on a single support. 
- The longitudinal distance between the SFERAX is not adjustable.
- Assembly is easier.
- Slightly higher precision.

Internal diameter

0 mm

Outside diameter

0 mm

301 - ES-1