SFERAX INCHES STANDARD 101824 B
7010.101824.10
Application
This ball bearing provides high precision linear movements, without stroke limitation, without play and practically free of friction and wear.
Design
Consists of a rigid housing produced from bearing steel 100 Cr6, hardened to 63 HRC, ground and lapped inside, (Grade B only ground). Solid brass precision-milled ball tray.
Inner diameter d
15.875 mm
Outer diameter D
28.575 mm
Length
38 mm
Available
| Product Number | 7010.101824.10 |
| Product Designation | SFERAX INCHES STANDARD 101824 B |
| Net Weight | 104 g |
| Outer diameter D | 28.575 |
| Inner diameter d | 15.875 |
| Length | 38 mm |
| Tolerance Inner diameter | 0/+20 µm |
| Tolerance outer diameter | 0/-12 µm |
| Tolerance length | 0/-350 µm |
| Max. eccentricity | <15 µm |
| Recommended tolerance on the shaft | h6 |
| Dynamic load capacity | 1404 |
| Static load capacity N | 1560 |
| Dynamic factor Y | 0.00064 |
| Diameter balls b | 3.000 mm |
| Diameter bottom of grooves D1 | 27.3 mm |
| Spacing grooves (0/+01 mm) E | 24.900 mm |
| Width groove 0/+0.1 mm e | 1.40 mm |
| Cage material | DIN MS60Pb (17660) |
| Housing material | DIN 100Cr6 (1.3505) |
| Operating temperature | -30 / +80°C |
| Precision class | B |
| Recommended shaft quality | III |
| Tolerance Bore (pressed mounted) | -2/-10 µm |
| Tolerance bore (glue mounted) | H6 |
